MicoMova TC191 Full-Movement Mini View Camera

Description

Freedom to compose after tilt

An original mini view camera for architecture, landscape and commercial still life. Limited edition, supplied exclusively through the MicoMova website.

Independent front and rear whole-standard tilt, each ±20°, inclines the shift mechanisms. After Scheimpflug focusing, rear shift within the tilted sensor plane allows reframing without refocusing, with the lens fixed and the sensor plane unchanged.

The yaw-free movement arrangement supports controlled combinations of swing and tilt.

Movement and focusing

• Front and rear horizontal shift: ±35 mm each.
• Front and rear rise/fall: ±25 mm each.
• Front and rear swing: ±20° each.
• Front and rear tilt: ±15° each, independent of whole-standard tilt.
• Front and rear whole-standard tilt: ±20° each.
• Lead-screw dial graduations: 0.04 mm travel per division. This figure describes the graduation increment, not measured positioning accuracy.
• Quick 90° rear rotation and locking for portrait and landscape composition.

Modular packing

The camera separates into 4 modules without tools for packing and reassembly. A protective carrying case is included.

Included configuration

Includes the TC191 main unit with a 250 mm rail, one four-fold bellows, one camera or digital back adapter and one lens interface, selected to suit your equipment. TC191 currently supports four-fold bellows only. Select your camera or digital back mount above; the matching four-fold bellows is included in the displayed configuration price. Please provide your exact camera/back and lens models in the order notes, or contact us before ordering to confirm the required interfaces. Additional adapters and optional upgrades are not included unless specified.

Camera and digital back interfaces

Canon EF, RF and EF-M; Nikon F and Z; Sony E; Fujifilm X and G (GFX); Micro Four Thirds; Leica M; L-Mount; Hasselblad X. Digital back interfaces include Hasselblad V for compatible CFV backs and Phase One.

Choose the matching bellows and adapter: Type I for supported full-frame and APS-C camera interfaces; Type II for GFX, Hasselblad X and L-Mount; Type III for supported digital backs. L-Mount requires Type II despite its sensor format. Changing between bellows types requires the corresponding bellows as well as the adapter.

Lens interfaces

Native lens boards support Copal 00/0/1/3; Pentax 645/67; Mamiya 645/RB67/RZ67; Hasselblad V; Pentacon Six/Kiev 60; PL; and M39/M42/M65/M72 threaded interfaces, with matching thread pitch and board variant.

Optional lens board adapters accept Linhof 96×99 mm, Horseman 80×80 mm and Sinar 140 mm boards, or Fujifilm GX680 lens assemblies. They allow compatible lenses to retain their existing mounting arrangement.

Our interface range extends beyond the mounts listed. For less common equipment, contact us about other available adapters or a custom solution. Infinity focus and usable movements depend on flange distance, clearance, image circle and bellows. Mechanical compatibility does not imply electronic control.

Dimensions and weight

Weight: 2,300 g.
Length × width × height: 279 × 218.20 × 348.40 mm.
Measurements include bellows and knobs, and exclude camera, lens and tripod head. Length includes the rail-end focusing knob and is measured to the front end of the rail, with the movable front standard within that limit.

Cameras, lenses and tripod heads shown in photographs are not included.

Discuss your configuration · Why we developed the TC191

Optional lens boards and adapters

Select additional boards for your lenses, or retain a compatible large-format lens board with a matching adapter. Confirm the mount, flange distance and clearance for your configuration.

View all lens boards → · View all lens board adapters →